AC 130-5

Small 5-Axle Machine with Powerful Performance

Compact & strong 
The Demag AC 130-5 sets the tone in its capacity class: With a total length of only 14.45 meters and a carrier width of 2.75 meters, there is no other crane that is as compact. And yet it is an impressive work site performer thanks to its 60-meter main boom and a maximum system length of 86.50 meters.

Capacity Class 140 USt / 130 t
Max Main Boom Length 196,9 ft / 60 m
Max System Length 283,8 ft / 86,5 m
Axles 5 / 5

Enhanced lifting capacity with IC-1 Plus
Thanks to its innovative IC-1 Plus control system, the Demag AC 130-5 can even handle lifts that are normally the exclusive job of larger cranes. The system is designed to calculate the crane’s lifting capacity for every position of the boom subject to the slewing angle of the superstructure, in real time. This means that the lifting capacity for a specific radius is no longer limited to the lowest value for a pre-calculated 360° lifting capacity, as used to be the case. Instead, the crane can always take full advantage of the maximum available lifting capacity. This advantage is particularly useful when it comes to lifts requiring an asymmetric outrigger setup.

Clean axle loads
Its clever axle load distribution makes the Demag AC 130-5 truly roadworthy, as it remains under an axle load limit of 12 tonnes even with a payload of up to 500 kilograms. In other words: For many jobs, it does not require additional transport vehicles, thus eliminating the costs. Moreover, the crane can be quickly set up on-site, as it already carries everything it needs to get working.

More shared components = lower costs
The Demag AC 130-5 is designed to help keep your operating costs down. To this end, many of the Demag 5-axle cranes’ components are interchangeable – from hoist 2, through the main boom extensions and runner, all the way to the swing-away rooster sheaves and heavy-lift attachment. This makes work easier for your service technicians and lowers your inventory costs.